Quick & efficient cooling system flushing
To ensure the optimum operation of your cooling system it is important to secure that the coolant is not polluted with abrasive particles and foreign materials. This is not a problem with the JWL Jet Flusher. With the Jet Flusher you can flush the whole system without use of solvents and harsh chemicals. It uses a combination of water and compressed air, which increases the water pressure without damaging the surface.
The Jet Flusher is equipped with adjustments for both air and water flow, which easily can be set for the required output. Furthermore this allows the water supply to be shut of directly at the Jet Flusher instead of at the water tap, when having a break or at nozzle change. The water can be connected either by using the supplied nipple (1/2″ /ø13 mm) that fits most common water couplings or by using the built-in 3/4″ GHT water hose thread.
The Jet Flusher comes as standard with a Jet Flusher nozzle that easily can be changed for other nozzles such as the Jet Washer nozzle.
CAUTION: Extreme care should be taken when flushing cooling systems in poor condition.
- Optimum flushing of cooling systems - without solvent or harsh chemicals
- Individual adjustments for both air and water flow
- Combines water with compressed air for increased efficiency
- Multi functional - possible to change the nozzle
|Working pressure||6-10 bar (87-145 psi)|
|Air consumption||Min. 200 l/min - 2,5 HP air compressor|
|Water connection||1/2" nipple for water coupling / 3/4" GHT thread|
|Air connection||1/4" internal thread (BSP)|
|Handle and trigger||Acetal plastic|
|Internal nozzle||Steel, el. galvanized|
|Springs||Hardened spring wire|