Air Boy® Thrust
Blow gun with very high airflow
Air Boy® THRUST is ideal for the big cleaning tasks where extremely high airflow is needed. The thrust nozzle increases the airflow by 100 % because of the venturi principle – and is at the same time unblockable. The blow gun is available in different variants, which can increase the airflow and make it usable at narrow places.
In selected models an angle nozzle is enclosed, which is perfect for blowing around corners, cleaning the inside of cylindrical objects and other hard to reach places. The angle nozzle can also come as an accessory. The pipes with extra lengths is produced with a piece of insulation that protects the hand against cold air.
Compliant with the following directives: OSHA directive STD 1-13.1 – Max. 30 psi when blocked.
This product is suitable for
The nozzle increases airflow
The venturi nozzle increases airflow by drawing in ambient air through the holes in the side. The holes also ensure that the blow gun is blockage-free. Air Boy® Thrust is also available in a long version with extra nozzles.
The original Air Boy® Thrust venturi nozzle.
90º angular nozzle with 4 x 3 holes.
Directional side nozzle with 1 hole.
|Max. 12 bar
|600 l/min (8 bar)
|98.2 dB (8 bar)
101.5 dB (6 bar)
|-10 oC til +80 oC
|~0.118 – 0.320 kg
|Handle and trigger
|Blowing tube & shaft
|Hardened spring wire
Max. 85 dB
|OSHA 1910.95 (b)
Max. 90 dB 8hr
|OSHA STD 01-13-001
Max. 30 psi when blocked
Variants and data
Thrust venturidyse, 1 m pipe, incl. angular nozzle
Thrust venturidyse, 1 m pipe, incl. side nozzle
Questions about compressed air solutions?
If you have question about our blow guns, pneumatic tools or other products, then we would like to help you.